Why do heating systems need protecting with a Power Flush
As soon as heating is installed and filled with
water deteriortion of the system begins.The combination of water,air,a mixture of metals and even installation debris and
contaminants can result in internal corrosion,sludge formation in low flow areas and scaling of Boilers and heat exchangers.Symptons
include cold panels in radiators,blocked radiators,irritating boiler noises,a long recovery time after drawing off hot water,an
inadequate water supply, and the failure of pumps,radiators and valves.These problems are not inevitable and good care and
maintenance of a system and the addition to the heating system of a quality scale /corrosion inhibitor such as system safe
DM will prevent and often cure them.
Clearflow Power Flushing by London Power
Flush is not a high pressure operation and it is suitable for most domestic wet central heating systems.It is carried out
withe minimum of disturbance and disruption to the normal operation of the system,often without disconnecting the boiler or
any radiators.
During the Clearflow process radiators are individually flushed without
removing or disconecting them from the system by directing the full output of the pump through each radiator separately.